TL;DR: Secure Payment Terminal Board for Supermarket Checkout Lane
AndroidSBC field desk: POS rollout map updated across supermarkets, restaurants, hotels and fuel forecourts serving Vilnius, Lithuania. The WF-P3602 POS Android motherboard spans the mobile handheld POS with 4G and barcode engine and eleven sister models in the WF-P series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, MIPI DSI output at 720p, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Vilnius and Lithuania importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.
About AndroidSBC and the POS Android Motherboard Family
The WF-P family covers the full span a Vilnius retail group will meet in one refresh cycle: a 2GB entry counter board for small format stores, a 4GB dual-screen tier for restaurants, an 8GB AI tier for face payment, and a wide-temperature industrial tier for unattended cabinets that sit outside. The AndroidSBC engineering desk keeps a reference image per silicon tier, so a Lithuania partner developing against the RK3576 board is testing against the same build that ships in volume, not a one-off sample image.
WF-P3602 Technical Specifications
| Parameter | AndroidSBC WF-P3602 (mobile handheld POS with 4G and barcode engine) | Industry Average |
|---|---|---|
| Processor | RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 22nm | Older 28nm or 40nm process |
| GPU | Mali-G52 2EE | Older Mali-450 or basic GPU |
| NPU / AI | 1 TOPS | No NPU on competing entry boards |
| Memory | 4GB LPDDR4 | DDR3 1GB / 2GB on competing boards |
| Storage | 32GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | MIPI DSI output at 720p | Single HDMI 1080p only on competing boards |
| Touch support | 5-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 13 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| POS peripherals | Thermal printer, receipt printer, barcode scanner, cash drawer, customer display | No bundled printer, scanner or drawer driver SDK on competing boards |
| Operating temperature | -10C to 55C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3602 (mobile handheld POS with 4G and barcode engine) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Lithuania importers sourcing the WF-P family, the WF-P3602-A variant is the typical configuration for the tableside ordering handheld rollout use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing POS Android Motherboards for Lithuania Buyers
Then there is the fiscal layer. In Lithuania the receipt has to be produced in a form the tax authority recognises, which means the printer handshake, the log retention and the receipt font set have to be right before the first store opens.
AndroidSBC answers the continuity problem with a frozen bill of materials. Each WF-P production lot is built against a fixed BOM and a fixed silicon tier, and the RRT documentation records the actual parts used, so the Vilnius partner re-ordering in a year receives a board that behaves the same way. The Vilnius frame agreement converted to a firm order on September 23, 2026 - 172900 boards, Hamburg - Shenzhen lane, one BOM, one firmware baseline, and the Lithuania compliance pack bundled.
Competitive Comparison: WF-P3602 vs Competing POS Android Boards
For Vilnius integrators the decision usually comes down to whether the vendor can hold a BOM, ship a driver set, and produce a test record - the four points below.
- Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
- Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
- Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.
Global POS Terminal and Smart Checkout Market Trends
AI is entering the lane for unglamorous reasons. Product recognition at an unattended counter, face payment at a convenience chain, and basket analytics at a supermarket all need an NPU on the board, and the mobile handheld POS with 4G and barcode engine tier carries one rather than pushing the load onto the CPU.
- Entry counter tier: WF-P3602 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
- Dual-screen mainstream tier: WF-P7600 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
- AI and unattended tier: WF-P7601 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.
Growth in Lithuania is concentrated in the formats the WF-P family was built for: convenience, quick service, supermarket checkout and unattended payment.
Partner Success Story: Nordweg Kasse Systemer (convenience chain POS integrator)
A Nordweg Kasse Systemer deployment in the Nordic convenience retail segment illustrates how the WF-P POS board family supports Vilnius integrators. Nordweg Kasse Systemer deployed 172900 WF-P boards across 140 convenience counters.
- OEM relationship: AndroidSBC private-label SKU shipped with Nordweg Kasse Systemer branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus RRT conformity, all bundled into the Shenzhen source-factory shipment.
Nordweg Kasse Systemer Technical Director for Nordic Convenience Retail noted: Nordweg Kasse Systemer picked the WF-P board because the receipt printer and the cash drawer fired correctly on the sample unit, and 172900 boards went into the Vilnius estate without a driver change.
Field Report: tableside ordering handheld rollout at a casual dining group
BAOLONG, September 23, 2026 - Bin Yu, AndroidSBC field desk. Thermal behaviour was the last gate: the WF-P3602 finished the burn-in at the top of the temperature window rather than at 25C, which is the condition a sealed counter actually presents. The WF-P3602 POS Android motherboard order for Vilnius, Lithuania cleared the burn-in station on schedule and is en route via the Hamburg - Shenzhen lane.
The WF-P3602 mobile handheld POS with 4G and barcode engine production lot includes the WF-P3602-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Lithuania integrators, the RRT conformity plus CE marking with RRT radio interface notification paperwork is bundled.
Filed by Bin Yu, AndroidSBC field desk, BAOLONG. Lithuania integrators typically request CE plus local radio interface notification for POS board deployments.
WF-P3602 Application Scenarios
The WF-P3602 mobile handheld POS with 4G and barcode engine sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3602-A configuration is the typical build for the tableside ordering handheld rollout use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.
- Supermarket and hypermarket checkout: the WF-P3602 drives the cashier screen while the second lane carries the customer display or the promotion wall in Vilnius.
- Convenience and small format stores: the WF-P5270 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
- Restaurants and quick service: the WF-P7600 runs the order screen plus a kitchen display output, with the customer display showing the order total.
- Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
- Unattended retail and vending: the WF-P7601 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
- Fuel forecourts and parking: the WF-P7602 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
- Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
- AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
- Retrofit programmes in Vilnius: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.
Partnership Models for Vilnius Buyers
Three tracks exist because Vilnius partners arrive from three directions: as a distributor with stock, as an integrator with a customer, or as a brand owner with a label.
- Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
Whether Lithuania partners take distribution, integration or private label, the WF-P board underneath carries the same serialised test record.
Frequently Asked Questions
Does the WF-P POS Android motherboard family support a mobile handheld POS with 4G and barcode engine?
Answer: It is. The WF-P family was specified around mobile handheld POS with 4G and barcode engine, and every board in the family is validated on that use case before it leaves the Longgang factory.
Which silicon tiers are available in the WF-P family for Lithuania buyers?
Answer: The WF-P family spans RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527. For Lithuania buyers the choice is driven by counter throughput and by whether the lane needs an NPU.
Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?
Answer: Yes - that is the standard counter configuration. The printer runs on RS232 or USB, the scanner on USB, and the drawer fires from the RJ11 header, all validated together before the lot ships.
What is the minimum order quantity and the sample lead time for Lithuania?
Answer: One board is enough to start: samples leave Longgang in 1-3 days. Volume orders run 15-30 days, and the Vilnius partner can call off against a frame agreement rather than ordering in one block.
Is custom ROM, boot logo or pre-installed app development available?
Answer: AndroidSBC supports custom Android AOSP builds, Linux BSP porting, boot logo and animation work, pre-installed apps and custom UI, and locks the result as the production image.
How are firmware updates delivered to a Lithuania estate after deployment?
Answer: AndroidSBC ships staged OTA with rollback as a bundled tool, so a Lithuania estate of several hundred lanes can be updated in waves rather than all at once.
What shipping terms does AndroidSBC support for Lithuania orders?
Answer: FOB Shenzhen, CIF and EXW are quoted on the same price list. Export customs clearance and global shipping are handled from Longgang, and the Vilnius partner receives tracking with the lot.
What happens if a board fails in the field in Lithuania?
Answer: Each board carries a serial number logged against its burn-in record, so a field failure in Lithuania is traced to its production lot, and the replacement ships from the same frozen BOM.
Contact AndroidSBC: Start Your WF-P3602 Sourcing Conversation
To start a WF-P POS Android motherboard sourcing conversation with AndroidSBC, a Wanlin Manufacturing Group export brand, Vilnius integrators can reach the export desk through the following channels:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
For Vilnius and Lithuania the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.
