TL;DR: Restaurant Tablet POS Board for Supermarket Checkout Lane
AndroidSBC supply desk: LPDDR4X and eMMC allocations locked for the WF-P board family serving Vilnius, Lithuania. The WF-P7600 POS Android motherboard spans the dual-screen POS terminal with cashier and customer display and eleven sister models in the WF-P series, all built on the RK3576 octa-core ARM Cortex-A72 2.2GHz plus Cortex-A53 64-bit SoC with the ARM Mali-G52 MC3 GPU, LVDS plus HDMI dual independent output at 1080p, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Vilnius and Lithuania importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.
About AndroidSBC and the POS Android Motherboard Family
Wanlin Manufacturing Group runs the Longgang production site where the WF-P POS motherboard family is assembled, burned in and packed. AndroidSBC handles the export side, and the two sit in the same building, which is why Lithuania importers get a fixed bill of materials per lot rather than a board that silently changes silicon between shipments. Peripheral validation happens on the Longgang bench with the actual printer, scanner and drawer models the Vilnius integrator intends to use, and the result is written into the shipment file rather than left to the integrator to discover on site.
WF-P7600 Technical Specifications
| Parameter | AndroidSBC WF-P7600 (dual-screen POS terminal with cashier and customer display) | Industry Average |
|---|---|---|
| Processor | RK3576 octa-core ARM Cortex-A72 2.2GHz plus Cortex-A53 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 8nm | Older 28nm or 40nm process |
| GPU | Mali-G52 MC3 | Older Mali-450 or basic GPU |
| NPU / AI | 6 TOPS | No NPU on competing entry boards |
| Memory | 8GB LPDDR4X | DDR3 1GB / 2GB on competing boards |
| Storage | 64GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | LVDS plus HDMI dual independent output at 1080p | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch on both panels | Resistive single-touch on competing boards |
| Operating system | Android 13 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| POS peripherals | Thermal printer, receipt printer, barcode scanner, cash drawer, customer display | No bundled printer, scanner or drawer driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P7600 (dual-screen POS terminal with cashier and customer display) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Lithuania importers sourcing the WF-P family, the WF-P7600-A variant is the typical configuration for the supermarket checkout lane rollout use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing POS Android Motherboards for Lithuania Buyers
Most Vilnius buyers start with three shortlisted Chinese factories and discover that two of them are trading companies quoting a board they do not build. The sample arrives, the second batch does not match, and nobody can produce the test record.
Dual-screen is a hardware capability on the WF-P family, not a marketing line. The RK3576 and RK3568 tiers carry independent framebuffers on two lanes, so the cashier screen runs the transaction while the customer display runs its own content at its own resolution. The 4th container of WF-P boards for Vilnius left the Longgang dock on September 23, 2026 carrying 148100 units, routed through the Hamburg - Shenzhen lane with the compliance file and the peripheral driver set already packed.
Competitive Comparison: WF-P7600 vs Competing POS Android Boards
Four differences decide whether a Lithuania POS rollout survives its second year, and they are all visible before the first lane goes live.
- Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
- Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
- Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.
Global POS Terminal and Smart Checkout Market Trends
The Lithuania picture follows the global pattern: cashless adoption sets the demand, and the replacement of legacy registers sets the volume. A Vilnius integrator who can offer a board that drops into an existing enclosure wins on installation cost as much as on unit price.
- Entry counter tier: WF-P7600 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
- Dual-screen mainstream tier: WF-P3399 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
- AI and unattended tier: WF-P1330 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.
The eight-tier WF-P line exists because Vilnius rollouts are not uniform. One chain will use four of the twelve models, and the point is that all four share one driver contract.
Partner Success Story: Nordweg Kasse Systemer (convenience chain POS integrator)
The Nordweg Kasse Systemer rollout in the Nordic convenience retail segment shows how the WF-P family from AndroidSBC supports Vilnius integrators. Nordweg Kasse Systemer deployed 148100 WF-P boards across 140 convenience counters.
- OEM relationship: AndroidSBC private-label SKU shipped with Nordweg Kasse Systemer branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus RRT conformity, all bundled into the Shenzhen source-factory shipment.
According to Nordweg Kasse Systemer Technical Director for Nordic Convenience Retail: Nordweg Kasse Systemer picked the WF-P board because the receipt printer and the cash drawer fired correctly on the sample unit, and 148100 boards went into the Vilnius estate without a driver change.
Field Report: dual-screen checkout lane rollout at a regional supermarket group
YANTIAN, September 23, 2026 - Deng Hui, AndroidSBC field desk. On the bench at Longgang the WF-P7600 drove the cashier panel, the customer display and the receipt printer simultaneously for the full burn-in window before the Lithuania lot was released. The WF-P7600 POS Android motherboard order for Vilnius, Lithuania cleared the burn-in station on schedule and is en route via the Hamburg - Shenzhen lane.
The WF-P7600 dual-screen POS terminal with cashier and customer display production lot includes the WF-P7600-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Lithuania integrators, the RRT conformity plus CE marking with RRT radio interface notification paperwork is bundled.
Filed by Deng Hui, AndroidSBC field desk, YANTIAN. Lithuania integrators typically request CE plus local radio interface notification for POS board deployments.
WF-P7600 Application Scenarios
The WF-P7600 dual-screen POS terminal with cashier and customer display sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P7600-A configuration is the typical build for the supermarket checkout lane rollout use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.
- Supermarket and hypermarket checkout: the WF-P7600 drives the cashier screen while the second lane carries the customer display or the promotion wall in Vilnius.
- Convenience and small format stores: the WF-P7602 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
- Restaurants and quick service: the WF-P3600 runs the order screen plus a kitchen display output, with the customer display showing the order total.
- Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
- Unattended retail and vending: the WF-P3601 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
- Fuel forecourts and parking: the WF-P3602 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
- Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
- AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
- Retrofit programmes in Vilnius: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.
Partnership Models for Vilnius Buyers
AndroidSBC does not force a track on Lithuania partners. The three below are the ones that actually get used.
- Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
AndroidSBC is recruiting local partners in Lithuania on all three tracks, and the qualification evidence needed to start is the same in each case.
Frequently Asked Questions
Does the WF-P POS Android motherboard family support a dual-screen POS terminal with cashier and customer?
Answer: Yes. AndroidSBC validates dual-screen POS terminal with cashier and customer on the bench with the actual peripherals the Vilnius partner intends to use, and the result is written into the shipment file.
Which silicon tiers are available in the WF-P family for Lithuania buyers?
Answer: Available tiers are RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527. AndroidSBC holds one fixed BOM per lot, so the Vilnius partner always knows which tier is shipping.
Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?
Answer: Yes. AndroidSBC validates the exact combination on the Longgang bench using the Vilnius partner printer and scanner models, and the validated configuration is locked as the production reference.
What is the minimum order quantity and the sample lead time for Lithuania?
Answer: Sample lead is 1-3 days and mass production is 15-30 days. MOQ depends on the track - distribution partners work from the price list, private-label SKUs are agreed per configuration.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes. AndroidSBC provides custom Android AOSP builds, custom boot animation and logo, pre-installed apps, custom UI, BSP porting and SDK modules, all built against a frozen BOM.
How are firmware updates delivered to a Lithuania estate after deployment?
Answer: Firmware is delivered over the network or by USB, with a staged release and a rollback path. AndroidSBC commits to a seven-year update window on the WF-P family.
What shipping terms does AndroidSBC support for Lithuania orders?
Answer: The export desk quotes FOB Shenzhen, CIF and EXW, handles customs clearance, and ships globally. The Vilnius partner picks the term and AndroidSBC books the lane.
What happens if a board fails in the field in Lithuania?
Answer: The RMA path uses the board serial number to identify the production lot, then replaces from stock held for the Vilnius programme so the lane is not down for a full lead time.
Contact AndroidSBC: Start Your WF-P7600 Sourcing Conversation
Vilnius integrators can reach the AndroidSBC export desk for the WF-P POS board family through the following channels:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to Lithuania buyers, a 15-30 day mass-production lead to bulk orders, and a seven-year firmware update window to the WF-P family.
