TL;DR: Social Security Payment Terminal
AndroidSBC manufacturer capacity statement from the smart payment terminal production base serving international market, Lithuania. The WF-SPT-06 smart payment terminal Android motherboard covers the kiosk payment terminal build with large touch panel and eleven sister configurations in the WF-SPT series, spanning the RK3399 dual-core ARM Cortex-A72 2.0GHz plus quad-core ARM Cortex-A53 1.5GHz SoC with the ARM Mali-T860 MP4 GPU, 8-inch 1920x1080 eDP capacitive touch panel, and Android 12 with AOSP baseline and optional GMS firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to international market and Lithuania importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.
About AndroidSBC and the Smart Payment Terminal Android Motherboard Family
Twelve configurations, one peripheral contract: that is the pitch AndroidSBC makes to Lithuania payment integrators. The reader antenna, the printer header, the scan engine mapping and the modem band list are documented once for the WF-SPT family and then reused, so the international market integration team is not re-qualifying a board from zero on every new format. Every configuration ships with the same Android build, the same peripheral contract and the same test report format, so a international market quality team that has signed off one WF-SPT board can read the next one without a new learning curve.
WF-SPT-06 Technical Specifications
| Parameter | AndroidSBC WF-SPT-06 (kiosk payment terminal build with large touch panel) | Industry Average |
|---|---|---|
| Processor | RK3399 dual-core ARM Cortex-A72 2.0GHz plus quad-core ARM Cortex-A53 1.5GHz SoC | Older dual-core or quad-core Cortex-A7 SoC |
| Process node | 28nm | Older 40nm process |
| GPU | Mali-T860 MP4 | Older Mali-400 or basic 2D GPU |
| Memory | 4GB LPDDR4 | DDR3 512MB or 1GB on competing boards |
| Storage | 32GB eMMC plus TF card up to 128GB | NAND flash 4GB or 8GB on competing boards |
| Display and touch | 8-inch 1920x1080 eDP capacitive touch panel with 10-point capacitive touch on the main panel | 4.3-inch 480x800 panel with resistive touch |
| Payment and capture | NFC contactless, IC card and QR with PIN pad header | Camera-only QR capture with no scan engine |
| Printer and peripherals | 80mm thermal printer header with 150mm per second output | No printer control header on competing boards |
| Wireless and positioning | dual-band WiFi 802.11 a/b/g/n/ac with Bluetooth 5.0 | Single-band 2.4G WiFi 802.11n with no modem |
| Interfaces | 1 USB Type-C host and OTG, 2 USB host, 1 RS232, 1 HDMI out, 6 GPIO, 1 thermal printer header | One USB port and no RS232 |
| Operating system | Android 12 with AOSP baseline and optional GMS | Android 9 or Android 10 on competing boards |
| Power and reliability | 12V DC input with 5V/3A peripheral rail, watchdog and scheduled power on, -10C to 50C operating ambient | No battery management and no watchdog |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-06 (kiosk payment terminal build with large touch panel) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Lithuania importers sourcing the WF-SPT family, the WF-SPT-06-A variant is the typical configuration for the quick service restaurant self-ordering kiosks use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Smart Payment Terminal Android Motherboards for Lithuania Buyers
Sourcing a smart payment terminal board for Lithuania is rarely a question of finding a cheap board. It is a question of finding a board that will still be buildable in three years, with the same printer pinout, the same reader antenna and the same Android baseline, because a payment estate is not refreshed on a whim.
The practical answer for international market buyers is to buy from a source factory that treats documentation as part of the product: CE marking with RRT radio interface notification reports, RRT conformity, the compliance set for Lithuania and a fixed bill of materials, all shipped with the first lot. AndroidSBC holds the 182300 board sample lot, the production slot and the compliance file on one schedule for international market, so the 4th release of the quarter is a shipment rather than a negotiation.
Competitive Comparison: WF-SPT-06 vs Competing Smart Payment Terminal Motherboards
The international market question is repeatability. Competing boards change panel vendors, printer drivers and modem modules between lots; the WF-SPT family holds them, which is what makes a Lithuania estate serviceable.
- vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
- vs single-configuration boards: twelve configurations share one peripheral contract, so a international market buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
- vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the Lithuania integrator to manage it.
- vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in international market is the board that ships in volume.
Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends
What Lithuania buyers are actually procuring is not a terminal, it is a platform they can repeat across formats. That is why the kiosk payment terminal build with large touch panel is specified with a peripheral contract rather than a feature list.
- Countertop tier: WF-SPT-07 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
- Unattended tier: WF-SPT-08 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
- Flagship tier: WF-SPT-11 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.
What the international market buyer should take from the numbers is a procurement rule: specify the peripheral contract and the firmware window first, then negotiate the unit price, because the integration labour is the larger line item in Lithuania.
WF-SPT-06 Application Scenarios
The WF-SPT-06 kiosk payment terminal build with large touch panel sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-06-A configuration is the typical build for the quick service restaurant self-ordering kiosks use case, with printer current profile, scan engine mapping and staged OTA management bundled.
- Convenience and grocery counters: the WF-SPT-02 takes contactless, IC card and QR at the till and prints the receipt in one pass.
- Restaurant and quick-service counters: the WF-SPT-11 runs order entry, payment and kitchen ticket printing on the same board.
- Unattended vending and lockers: the WF-SPT-03 pairs the modem with the printer header and the watchdog for sites with no staff present.
- EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
- Transit gates and event entry: the WF-SPT-06 takes contactless payment and prints the entry ticket without a fixed counter.
- Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
- Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
- Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
- Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.
Partnership Models for international market Buyers
AndroidSBC publishes these three tracks because Lithuania partners ask the same question in every first call: how much of the work do we take, and how much do you take.
- Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
- Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.
Whichever track a international market partner chooses, the board is the same board - what changes is the documentation set, the branding and how much of the integration AndroidSBC carries in Lithuania.
Frequently Asked Questions
Does the smart payment terminal board family support a kiosk payment terminal build with large touch panel?
Answer: Yes. AndroidSBC builds the kiosk payment terminal build with large touch panel as part of the twelve-configuration WF-SPT family, so the board arrives with its test report, its certificate set and its signed firmware image for Lithuania.
Which configurations are available in the WF-SPT family for Lithuania buyers?
Answer: The WF-SPT family covers RK3399 and eleven sister configurations, from the value countertop build to the outdoor sunlight readable build, with one Android baseline across the range for Lithuania.
Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?
Answer: Yes. The board runs the panel, the printer header and the scan UART at the same time, which is the configuration international market integrators validate during the joint qualification run at the Longgang factory.
What payment scheme certification support does AndroidSBC provide for Lithuania?
Answer: Certification support for Lithuania means RRT conformity documentation, CE marking with RRT radio interface notification test reports and a firmware signing record, all bundled into the shipment rather than sent after customs clearance in international market.
What is the minimum order quantity and the sample lead time for Lithuania?
Answer: MOQ depends on the track: stock configurations ship from one unit, private-label builds start at 500 boards, and both are quoted against the same frozen bill of materials for Lithuania.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes. AndroidSBC builds the custom image, validates it against the peripheral contract and ships it on the board, which removes the flashing step from the Lithuania integration plan.
How are firmware updates delivered to a Lithuania device estate after deployment?
Answer: AndroidSBC manages the Lithuania estate through staged OTA: signed images, grouped rollout, automatic rollback on failure and a maintenance window agreed with the international market operations team.
What shipping terms does AndroidSBC support for Lithuania orders?
Answer: The Lithuania lane runs weekly into Port of Hamburg, and the international market buyer receives the tracking reference, the packing list and the compliance file at the same time.
Contact AndroidSBC: Start Your WF-SPT-06 Sourcing Conversation
AndroidSBC is taking new Lithuania partner conversations for the WF-SPT family now. Send the format, the volume and the certification calendar and the engineering team returns a configuration proposal.
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
Wanlin Manufacturing Group builds the WF-SPT family in Shenzhen and exports it through AndroidSBC to Lithuania and more than 60 markets. international market enquiries for samples, price lists and certification files are answered within one working day.
