TL;DR: EMV Payment Terminal Board with 80mm Printer
AndroidSBC export compliance briefing covering the smart payment terminal board family serving international market, Lithuania. The WF-SPT-09 smart payment terminal Android motherboard covers the outdoor sunlight readable payment terminal build and eleven sister configurations in the WF-SPT series, spanning the A133 quad-core ARM Cortex-A53 1.6GHz SoC with the Imagination PowerVR GE8300 GPU, 6-inch 1080x1920 MIPI DSI sunlight readable 700 nit panel, and Android 12 with AOSP baseline firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to international market and Lithuania importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.
About AndroidSBC and the Smart Payment Terminal Android Motherboard Family
The smart payment terminal Android motherboard family from AndroidSBC is specified for the way Lithuania acquiring actually works - contactless first, QR close behind, receipt on paper, firmware signed, estate managed remotely. international market buyers get that as a standard baseline rather than as a paid engineering change. Firmware is treated as a managed asset on this family. Lithuania estates receive staged OTA groups with rollback, signed images and a published maintenance window, so a international market operations team can schedule an update rather than react to one.
WF-SPT-09 Technical Specifications
| Parameter | AndroidSBC WF-SPT-09 (outdoor sunlight readable payment terminal build) | Industry Average |
|---|---|---|
| Processor | A133 quad-core ARM Cortex-A53 1.6GHz SoC | Older dual-core or quad-core Cortex-A7 SoC |
| Process node | 28nm | Older 40nm process |
| GPU | PowerVR GE8300 | Older Mali-400 or basic 2D GPU |
| Memory | 4GB LPDDR4 | DDR3 512MB or 1GB on competing boards |
| Storage | 32GB eMMC plus TF card up to 128GB | NAND flash 4GB or 8GB on competing boards |
| Display and touch | 6-inch 1080x1920 MIPI DSI sunlight readable 700 nit panel with 10-point capacitive touch with glove and wet-finger support | 4.3-inch 480x800 panel with resistive touch |
| Payment and capture | NFC contactless, IC card and magnetic stripe with secure element | Camera-only QR capture with no scan engine |
| Printer and peripherals | 58mm thermal printer header with 90mm per second output | No printer control header on competing boards |
| Wireless and positioning | 4G LTE Cat 4 modem plus dual-band WiFi, Bluetooth 5.0 and GPS | Single-band 2.4G WiFi 802.11n with no modem |
| Interfaces | 1 USB Type-C host and OTG, 1 RS232, 1 RS485, 1 TTL UART, 6 GPIO, 1 SIM slot, 1 thermal printer header | One USB port and no RS232 |
| Operating system | Android 12 with AOSP baseline | Android 9 or Android 10 on competing boards |
| Power and reliability | 12V DC input with wide 9V to 36V range, surge protection and watchdog, -20C to 60C operating ambient | No battery management and no watchdog |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-09 (outdoor sunlight readable payment terminal build) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Lithuania importers sourcing the WF-SPT family, the WF-SPT-09-A variant is the typical configuration for the EV charging pillars, fuel forecourts and outdoor kiosks use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Smart Payment Terminal Android Motherboards for Lithuania Buyers
The hidden cost in Lithuania rollouts is the integration labour, not the silicon. A board that arrives with a validated printer profile, a documented scan mapping and an SDK that matches the shipped image removes weeks from a international market project plan.
The second problem is paperwork. A Lithuania shipment needs CE marking with RRT radio interface notification documentation that matches the actual configuration on the pallet, not a generic file copied from an older lot, and the international market customs broker is the one who pays when it does not. The commercial structure is deliberately boring - 103600 boards at a published price, the configuration frozen for the term of the agreement, and the compliance pack reissued whenever the Lithuania acquiring partner updates its requirements.
Competitive Comparison: WF-SPT-09 vs Competing Smart Payment Terminal Motherboards
A Lithuania integrator comparing two boards should compare the delivery file, not the datasheet. One side ships a test report and a compliance set; the other ships a board and a promise.
- vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
- vs single-configuration boards: twelve configurations share one peripheral contract, so a international market buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
- vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the Lithuania integrator to manage it.
- vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in international market is the board that ships in volume.
Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends
For international market integrators the market signal is simple - contactless and QR now carry the majority of face-to-face volume in Lithuania, so the board is specified around the reader and the camera first and the keypad second.
- Countertop tier: WF-SPT-01 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
- Unattended tier: WF-SPT-09 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
- Flagship tier: WF-SPT-04 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.
The Lithuania demand curve rewards the vendor who can hold a configuration. AndroidSBC treats a frozen bill of materials as the product feature that matters most to a international market integrator with an estate to maintain.
WF-SPT-09 Application Scenarios
The WF-SPT-09 outdoor sunlight readable payment terminal build sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-09-A configuration is the typical build for the EV charging pillars, fuel forecourts and outdoor kiosks use case, with printer current profile, scan engine mapping and staged OTA management bundled.
- Convenience and grocery counters: the WF-SPT-07 takes contactless, IC card and QR at the till and prints the receipt in one pass.
- Restaurant and quick-service counters: the WF-SPT-04 runs order entry, payment and kitchen ticket printing on the same board.
- Unattended vending and lockers: the WF-SPT-03 pairs the modem with the printer header and the watchdog for sites with no staff present.
- EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
- Transit gates and event entry: the WF-SPT-04 takes contactless payment and prints the entry ticket without a fixed counter.
- Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
- Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
- Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
- Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.
Partnership Models for international market Buyers
Three commercial structures cover almost every Lithuania programme AndroidSBC runs, from a distributor buying against a price list to a brand shipping its own label.
- Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
- Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.
All three tracks ship from the same source factory with the same compliance file, which is why international market partners can move between them as a Lithuania programme grows.
Frequently Asked Questions
Does the smart payment terminal board family support an outdoor sunlight readable payment terminal build?
Answer: Yes. The outdoor sunlight readable payment terminal build ships as a standard configuration, qualified on the Longgang bench with the printer mechanism, the reader antenna and the scan engine that the international market integrator will install.
Which configurations are available in the WF-SPT family for Lithuania buyers?
Answer: Twelve configurations span Allwinner A133 and the rest of the range: RK3568, RK3566, RK3576, RK3288 and RK3399 plus Allwinner A133, A64, H618 and T527, all on one peripheral contract.
Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?
Answer: Yes. One WF-SPT board drives the touch panel, the thermal printer and the scan engine simultaneously, and the current budget for all three is measured on the bench and written into the shipment file.
What payment scheme certification support does AndroidSBC provide for Lithuania?
Answer: The compliance file for Lithuania covers CE marking with RRT radio interface notification testing and RRT conformity, issued against the exact configuration that ships to international market rather than a generic family file.
What is the minimum order quantity and the sample lead time for Lithuania?
Answer: AndroidSBC quotes samples from one unit with a 1-3 day lead time, holds the configuration for the length of the agreement, and publishes volume tiers from 500 boards for Lithuania programmes.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes. The engineering team supports driver development, API integration, locale packs and application pre-install, and the resulting image is signed and staged into OTA groups for international market.
How are firmware updates delivered to a Lithuania device estate after deployment?
Answer: The firmware window is published with the configuration: signed images, staged groups, rollback and a maintenance schedule, all documented for the Lithuania operations team.
What shipping terms does AndroidSBC support for Lithuania orders?
Answer: Shipments to Lithuania clear through Port of Hamburg on a weekly lane, with the packing list keyed to the configuration code and the certificate set inside the same carton.
Contact AndroidSBC: Start Your WF-SPT-09 Sourcing Conversation
AndroidSBC works with distributors, integrators and brand owners in Lithuania. Tell the team which track fits and the proposal comes back against a published price list.
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
The Longgang source factory holds capacity at 5000 boards per week for Lithuania programmes. international market partners get a frozen bill of materials, a published price list and a compliance file matched to every lot.
