TL;DR: RK3576 Payment Terminal Motherboard with Hardware Watchdog
AndroidSBC release: twelve-configuration smart payment terminal board family opens for volume export orders serving international market, Lithuania. The WF-SPT-05 smart payment terminal Android motherboard covers the dual-screen smart payment terminal build for chain checkout and eleven sister configurations in the WF-SPT series, spanning the RK3576 quad-core ARM Cortex-A72 2.2GHz plus quad-core ARM Cortex-A53 1.8GHz SoC with the ARM Mali-G52 MC3 GPU, 8-inch 1280x800 eDP main panel plus 4-inch customer screen, and Android 14 with AOSP baseline and optional GMS firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to international market and Lithuania importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.
About AndroidSBC and the Smart Payment Terminal Android Motherboard Family
AndroidSBC builds smart payment terminal Android motherboards for the unattended and attended ends of the same market. A international market buyer can take a countertop configuration for a shop counter and an outdoor configuration for a charging pillar from one supplier, on one Android baseline, with one SDK. The Lithuania partner gets the compliance file with the first lot - not after the first complaint - because the certification paperwork, the test report and the firmware signing keys are prepared alongside the production order for international market.
WF-SPT-05 Technical Specifications
| Parameter | AndroidSBC WF-SPT-05 (dual-screen smart payment terminal build for chain checkout) | Industry Average |
|---|---|---|
| Processor | RK3576 quad-core ARM Cortex-A72 2.2GHz plus quad-core ARM Cortex-A53 1.8GHz SoC | Older dual-core or quad-core Cortex-A7 SoC |
| Process node | 8nm | Older 40nm process |
| GPU | Mali-G52 MC3 | Older Mali-400 or basic 2D GPU |
| Memory | 8GB LPDDR5 | DDR3 512MB or 1GB on competing boards |
| Storage | 128GB eMMC plus TF card up to 256GB | NAND flash 4GB or 8GB on competing boards |
| Display and touch | 8-inch 1280x800 eDP main panel plus 4-inch customer screen with 10-point capacitive touch with glove and wet-finger support | 4.3-inch 480x800 panel with resistive touch |
| Payment and capture | NFC contactless, IC card, magnetic stripe and QR with secure element | Camera-only QR capture with no scan engine |
| Printer and peripherals | 80mm thermal printer header with 180mm per second output | No printer control header on competing boards |
| Wireless and positioning | dual-band WiFi 6 with Bluetooth 5.4 and optional 5G sub-6 modem | Single-band 2.4G WiFi 802.11n with no modem |
| Interfaces | 1 USB Type-C host and OTG, 2 USB host, 1 RS232, 1 HDMI out, 8 GPIO, 1 thermal printer header | One USB port and no RS232 |
| Operating system | Android 14 with AOSP baseline and optional GMS | Android 9 or Android 10 on competing boards |
| Power and reliability | 12V DC input with 5V/3A peripheral rail, dual-cell RTC and watchdog, -20C to 60C operating ambient | No battery management and no watchdog |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-05 (dual-screen smart payment terminal build for chain checkout) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Lithuania importers sourcing the WF-SPT family, the WF-SPT-05-A variant is the typical configuration for the hypermarket and supermarket chain checkout lanes use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Smart Payment Terminal Android Motherboards for Lithuania Buyers
Attended and unattended payment hardware share a board but not a duty cycle. The international market buyer who specifies a single configuration for both usually ends up over-specifying the counter and under-specifying the kiosk.
The practical answer for international market buyers is to buy from a source factory that treats documentation as part of the product: CE marking with RRT radio interface notification reports, RRT conformity, the compliance set for Lithuania and a fixed bill of materials, all shipped with the first lot. For the international market buyer the test is simple - order 25000 boards as a sample lot, run them against the printer, the reader and the scan engine the project actually uses, and check whether the delivery file matches the pallet. AndroidSBC ships 25000 boards on the Hamburg - Shenzhen lane with the paperwork already attached.
Competitive Comparison: WF-SPT-05 vs Competing Smart Payment Terminal Motherboards
Competing boards in this class usually quote a chip and a price. AndroidSBC quotes a configuration: the printer profile, the reader antenna specification, the modem band list, the firmware window and the compliance set for Lithuania.
- vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
- vs single-configuration boards: twelve configurations share one peripheral contract, so a international market buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
- vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the Lithuania integrator to manage it.
- vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in international market is the board that ships in volume.
Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends
The payment hardware market that matters to international market buyers is not the card terminal of ten years ago. It is the mixed estate - countertop lanes, unattended kiosks, outdoor pillars and softpos capture - and the board that serves all four is the one that wins the Lithuania programme.
- Countertop tier: WF-SPT-07 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
- Unattended tier: WF-SPT-03 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
- Flagship tier: WF-SPT-11 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.
AndroidSBC positions the WF-SPT family against that reading of the Lithuania market: one peripheral contract, one Android baseline, one compliance file, so the international market integrator scales without re-qualifying.
WF-SPT-05 Application Scenarios
The WF-SPT-05 dual-screen smart payment terminal build for chain checkout sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-05-A configuration is the typical build for the hypermarket and supermarket chain checkout lanes use case, with printer current profile, scan engine mapping and staged OTA management bundled.
- Convenience and grocery counters: the WF-SPT-01 takes contactless, IC card and QR at the till and prints the receipt in one pass.
- Restaurant and quick-service counters: the WF-SPT-05 runs order entry, payment and kitchen ticket printing on the same board.
- Unattended vending and lockers: the WF-SPT-08 pairs the modem with the printer header and the watchdog for sites with no staff present.
- EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
- Transit gates and event entry: the WF-SPT-11 takes contactless payment and prints the entry ticket without a fixed counter.
- Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
- Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
- Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
- Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.
Partnership Models for international market Buyers
international market buyers usually land on one of three tracks with AndroidSBC, and the difference between them is how much of the integration the partner wants to own.
- Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
- Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.
For international market the practical outcome is that the commercial model is negotiable while the technical baseline is not, which keeps a Lithuania estate serviceable through growth.
Frequently Asked Questions
Does the smart payment terminal board family support a dual-screen payment terminal build for chain checkout?
Answer: Yes. AndroidSBC holds the dual-screen payment terminal build for chain checkout as a production configuration with a published price, a sample lead time of 1-3 days for international market and a compliance file matched to the parts on the pallet.
Which configurations are available in the WF-SPT family for Lithuania buyers?
Answer: Buyers in Lithuania can specify RK3576 or any of the eleven sister configurations without re-qualifying the printer, the reader or the scan engine, because the peripheral contract is common to the family.
Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?
Answer: Yes. A single WF-SPT board handles all three peripherals, and the international market acceptance test is run with the actual printer mechanism and scan engine the project will deploy in Lithuania.
What payment scheme certification support does AndroidSBC provide for Lithuania?
Answer: Scheme certification in Lithuania is handled as documentation work: CE marking with RRT radio interface notification testing, RRT conformity and a signed firmware image, all matched to the configuration code shipped to international market.
What is the minimum order quantity and the sample lead time for Lithuania?
Answer: AndroidSBC publishes the price list by configuration and volume tier, quotes international market sample orders in 1-3 days, and holds production capacity at 5000 boards per week for Lithuania rollouts.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes. Firmware customisation covers the ROM, the boot animation, the pre-installed application set and the kiosk lockdown policy, with the signed image delivered alongside the international market production lot.
How are firmware updates delivered to a Lithuania device estate after deployment?
Answer: Staged OTA groups are created during qualification, so the international market estate is never updated in a single wave, and every image carries a signature the terminal verifies before it applies.
What shipping terms does AndroidSBC support for Lithuania orders?
Answer: AndroidSBC ships EXW, FOB Shenzhen, CIF and DAP terms, with Port of Hamburg as the standard discharge port for Lithuania orders and the compliance file attached to the carton.
Contact AndroidSBC: Start Your WF-SPT-05 Sourcing Conversation
The Lithuania desk at AndroidSBC handles configuration selection, sample dispatch, joint qualification and volume scheduling, and the first call is technical rather than commercial.
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
AndroidSBC is the export arm of Wanlin Manufacturing Group and is recruiting Lithuania distributors, integrators and brand partners for the smart payment terminal board family. Sample dispatch for international market runs in 1-3 days.
