TL;DR: 8GB LPDDR4X Mobile POS Board with Bluetooth 5.0
AndroidSBC sourcing desk: RK3568 and A133 handheld POS board pricing held flat through the current quarter serving international market, Lithuania. The WF-POSH-07 handheld financial POS Android motherboard covers the dual-screen handheld POS build with customer display and eleven sister configurations in the WF-POSH series, spanning the RK3399 dual-core ARM Cortex-A72 2.0GHz plus quad-core ARM Cortex-A53 1.5GHz SoC with the ARM Mali-T860 MP4 GPU, 7-inch 1280x800 eDP main panel plus 4-inch customer screen, and Android 12 with AOSP baseline and optional GMS firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-POSH family from the Longgang source factory in Shenzhen to international market and Lithuania importers who build handheld payment terminals, mobile checkout devices, delivery collection units, warehouse scanners and field service handhelds.
About AndroidSBC and the Handheld Financial POS Android Motherboard Family
AndroidSBC is the export arm of Wanlin Manufacturing Group, and it builds the twelve-configuration WF-POSH handheld POS board family at the Longgang source factory in Shenzhen. The line spans Rockchip RK3568, RK3566, RK3576, RK3288 and RK3399 alongside Allwinner A133, A64, H618 and T527, so a international market integrator can hold one enclosure, one printer and one scan engine while moving between an entry checkout board and a face-payment flagship without re-qualifying the payment application. Peripheral validation happens on the Longgang bench with the actual printer mechanism and scan engine the international market integrator intends to buy, and the current draw, the print speed and the decode result are written into the shipment file rather than left for the integrator to discover on site.
WF-POSH-07 Technical Specifications
| Parameter | AndroidSBC WF-POSH-07 (dual-screen handheld POS build with customer display) | Industry Average |
|---|---|---|
| Processor | RK3399 dual-core ARM Cortex-A72 2.0GHz plus quad-core ARM Cortex-A53 1.5GHz SoC | Older dual-core or quad-core Cortex-A7 SoC |
| Process node | 28nm | Older 40nm process |
| GPU | Mali-T860 MP4 | Older Mali-400 or basic 2D GPU |
| Memory | 4GB LPDDR4 | DDR3 512MB or 1GB on competing boards |
| Storage | 32GB eMMC plus TF card up to 128GB | NAND flash 4GB or 8GB on competing boards |
| Display and touch | 7-inch 1280x800 eDP main panel plus 4-inch customer screen with 10-point capacitive touch on the main panel | 4.3-inch 480x800 panel with resistive touch |
| Payment and capture | NFC contactless, IC card and QR camera capture with signature capture | Camera-only QR capture with no scan engine |
| Printer and peripherals | 80mm thermal printer header with 110mm per second output | No printer control header on competing boards |
| Wireless and positioning | dual-band WiFi 802.11 a/b/g/n/ac with Bluetooth 5.0 | Single-band 2.4G WiFi 802.11n with no modem |
| Interfaces | 1 USB Type-C host and OTG, 2 USB host, 1 RS232, 1 HDMI out, 6 GPIO, 1 thermal printer header | One USB port and no RS232 |
| Operating system | Android 12 with AOSP baseline and optional GMS | Android 9 or Android 10 on competing boards |
| Power and reliability | 7.4V dual-cell battery management with 9V/2A fast charge, -10C to 50C operating ambient | No battery management and no watchdog |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-POSH-07 (dual-screen handheld POS build with customer display) holds the touch panel, the thermal printer and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Lithuania importers sourcing the WF-POSH family, the WF-POSH-07-A variant is the typical configuration for the counter and queue-busting checkout with customer display use case, in a handheld terminal footprint with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Handheld Financial POS Android Motherboards for Lithuania Buyers
Modem certification is where most competing boards fail quietly. They list 4G LTE, but only two of the local bands are type-approved, so the terminal roams onto a band the operator does not support and the transaction times out.
AndroidSBC answers the printer problem with a documented current budget. Each WF-POSH lot ships with the print speed, the stepper timing and the peak current measured against the rated battery, and the RRT file records the configuration that was actually validated. The 4th container of WF-POSH boards for international market left the Longgang dock on September 29, 2026 carrying 49300 units, routed through the Hamburg - Shenzhen lane with the compliance file and the printer validation set already packed.
Competitive Comparison: WF-POSH-07 vs Competing Handheld POS Motherboards
The comparison below is the one international market buyers run when they shortlist three Chinese factories, and it is where the WF-POSH family separates from the field.
- Payment peripheral readiness: NFC contactless, IC card, magnetic stripe, thermal printer and 2D scan engine driven from one validated driver set, so international market integrators build a terminal without writing a printer timing loop.
- Bundled integration: printer current budget, scan engine mapping, card reader configuration, language packs and the peripheral driver set ship in the carton; competing handheld POS boards sold to international market usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, and the hardware security documentation a international market acquirer asks for is bundled rather than improvised.
- Long-term supply: onboard eMMC with a TF card slot, one fixed bill of materials per production lot and a seven-year firmware window, against the frequent component swaps seen on competing boards reaching international market.
Global Mobile Payment, Handheld POS and Cashless Checkout Market Trends
Fiscal and e-invoicing rules are quietly reshaping hardware choice in Lithuania. Once the receipt has to be transmitted to a revenue authority, the printer path and the secure clock on the board become procurement criteria, which is why the dual-screen handheld POS build with customer display tier carries an RTC and a signed update channel.
- Entry checkout tier: WF-POSH-03 covers card, receipt and peripheral handling on a single 5.5-inch handheld, which is the configuration most small retail networks standardise on.
- Connected field tier: WF-POSH-09 carries the modem, printer and peripheral options that delivery, courier and field service fleets specify, with positioning available on the logistics configuration.
- Flagship chain tier: WF-POSH-04 adds the larger memory and storage bundle, the customer-facing screen option and the higher battery budget that chain formats require.
For international market partners the commercial conclusion is that the board vendor has to be a factory. A trading company cannot hold a bill of materials across a three-year refresh.
WF-POSH-07 Application Scenarios
The WF-POSH-07 dual-screen handheld POS build with customer display sits inside a twelve-configuration WF-POSH Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-POSH-07-A configuration is the typical build for the counter and queue-busting checkout with customer display use case, with printer current profile, scan engine mapping and staged OTA management bundled.
- Convenience and grocery checkout: the WF-POSH-12 turns a queue into a transaction at the shelf rather than at the till.
- Quick-service restaurants and milk tea counters: the WF-POSH-11 takes the order, prints the ticket and takes payment in one pass.
- Delivery and last-mile collection: the WF-POSH-09 pairs the LTE modem with the scan engine and the printer for proof of delivery at the door.
- Warehouse picking and stocktaking: the WF-POSH-05 runs a twelve-hour shift on one battery with a sunlight readable panel.
- Parking, tolling and traffic enforcement: the WF-POSH-07 prints a citation and takes contactless payment on the same device.
- Banking agents and field insurance: card, QR and electronic signature capture away from a branch network.
- Mobile ticketing and event entry: scan, print and take payment at a gate without fixed infrastructure.
- Pop-up markets and street vending: a merchant account on a device that fits in an apron pocket.
- Retrofit programmes in international market: the same board re-uses the installed printer mechanism and scan engine, so an estate can be refreshed device by device.
Partnership Models for international market Buyers
Because the WF-POSH family is built at the Longgang source factory, all three tracks below come with the same frozen bill of materials and the same seven-year firmware window.
- Distribution track: the partner buys the WF-POSH board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
- Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-POSH board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.
For international market buyers the practical difference between the tracks is who holds the stock and whose name is on the carton, not what is inside the carton.
Frequently Asked Questions
Does the handheld POS board family support a dual-screen handheld POS build with customer display?
Answer: Yes. AndroidSBC validates dual-screen handheld POS build with customer display on the bench with the actual printer mechanism and scan engine the international market partner intends to use, and the result is written into the shipment file.
Which configurations are available in the WF-POSH family for Lithuania buyers?
Answer: Twelve configurations are available, spanning Rockchip RK3568, RK3566, RK3576, RK3288 and RK3399 alongside Allwinner A133, A64, H618 and T527. The variants differ on the display, the modem, the memory and storage bundle and the payment peripherals, and international market buyers pick the combination that fits the acquirer requirement.
Can one handheld POS board drive a touch panel, a thermal printer and a scan engine at once?
Answer: Yes - panel, printer and scanner run concurrently on the same board, with the trigger latency and the print speed written into the shipment file for Lithuania buyers.
What payment scheme certification support does AndroidSBC provide for Lithuania?
Answer: The honest answer for Lithuania is that scheme certification sits with the finished terminal, not with the bare board. AndroidSBC supports it with the secure element interface, the hardware crypto path and the evidence pack, and the international market partner or acquirer completes the certification.
What is the minimum order quantity and the sample lead time for Lithuania?
Answer: Samples leave Longgang in 1-3 days and volume orders in 15-30 days. A international market partner starting on a stock configuration can begin at sample quantity and convert to a call-off schedule later.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes. Custom ROM, boot logo, boot animation, pre-installed applications and launcher lockdown are all available. The board ships on an AOSP baseline, and GMS licensing or EDLA enrolment is arranged per programme - AndroidSBC supplies the hardware, the Android version and the test evidence, while the international market partner or brand owner completes the agreement with Google.
How are firmware updates delivered to a Lithuania device estate after deployment?
Answer: The Lithuania estate is updated through staged OTA with a signed manifest, and each terminal reports its build number back to the management console. USB and TF card recovery remain for units that go offline for long periods.
What shipping terms does AndroidSBC support for Lithuania orders?
Answer: Shipments to Lithuania run EXW, FOB Shenzhen or CIF on the Port of Hamburg lane, and DDP is offered once a lane is established. Compliance paperwork is packed with the goods.
Contact AndroidSBC: Start Your WF-POSH-07 Sourcing Conversation
international market integrators can reach the AndroidSBC export desk for the handheld POS board family through the following channels:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to Lithuania buyers, a 15-30 day mass-production lead to bulk orders, and a seven-year firmware update window to the WF-POSH family.
