News and Trends
Fast Food QSR Menu Display, WF-RK3588S, AndroidSBC, Vilnius
TL;DR: Fast Food QSR Menu Display
SHENZHEN, China, September 10, 2026 - The WF-RK3588S board line at Wanlin Longgang closed lot 394 this week. 16,020 units are now booked for Vilnius, Lithuania, shipped FOB with the full certification file attached.
AndroidSBC export compliance briefing covering the WF-Series custom board family serving Vilnius, Lithuania. Nine boards, one source factory. The WF-Series covers Allwinner A133, H618, and T527 alongside Rockchip RK3588, RK3568, RK3566, and RK3288, plus two SOM options (WF-A133S and WF-RK3588S) for buyers who would rather design a carrier than a motherboard. Every board leaves the Wanlin Longgang plant with a per-lot certification pack and a burn-in record traceable by unit barcode. Buyers in Vilnius and Lithuania can mix platforms inside a single framework agreement.

About AndroidSBC and the Rockchip RK3588 Board Family
The WF-Series is a nine-board custom line from AndroidSBC, the export arm of Wanlin Manufacturing Group in Shenzhen. Three Allwinner platforms (A133, H618, T527) and four Rockchip platforms (RK3588, RK3568, RK3566, RK3288) sit under one part-number scheme, with two SOM modules for carrier-board projects. Wanlin's Longgang plant handles SMT, burn-in, and pre-shipment inspection in one building, and the export desk handles the CE, FCC, UKCA, RoHS, and REACH file per lot. For Lithuania importers, the line covers the OTT box, commercial display, industrial control, edge AI, and POS categories that a Vilnius distributor is most often asked to quote.
WF-RK3588S Technical Specifications
| Parameter | AndroidSBC WF-RK3588S (SOM Module and SMARC Carrier Board) | Industry Average |
|---|---|---|
| Processor | Rockchip RK3588 octa-core 4x Cortex-A76 + 4x Cortex-A55 (8nm) + 6 TOPS NPU on a SMARC 2.2 module | Quad-core Cortex-A55 2.0GHz without NPU |
| Process node | 8nm | 22nm-28nm |
| GPU / AI | Arm Mali-G610 MP4 + 6 TOPS NPU | Mali-G52 with 1 TOPS |
| Video decode | 8K@60fps H.265 / VP9 / AV1 hardware decode | 4K@60fps hard limit |
| Module standard | SMARC 2.2 and COM Express Type 6 pin-out, 314-pin MXM edge connector | Non-standard SO-DIMM form factor |
| Memory | 8GB LPDDR4X onboard (16GB / 32GB LPDDR5 optional) | LPDDR4 2GB |
| Storage | 64GB eMMC 5.1 onboard (32GB / 128GB optional) | eMMC 16GB only |
| Carrier interface | PCIe 3.0 x4, SATA 3.0, USB 3.0, dual Gigabit Ethernet, HDMI 2.1, DP 1.4, MIPI CSI broken out | Limited high-speed I/O |
| Expansion | M.2 Key-M NVMe and M.2 Key-E WiFi on the reference carrier | No expansion slots |
| Thermal range | Industrial grade -40C to 85C with documented thermal solution | 0C to 60C commercial |
| Design service | Carrier schematic review, stack-up review, signal integrity report, BSP porting | Module-only supply |
| OS support | Android 12 / 13 / 14 + Linux Ubuntu / Debian + OpenHarmony | Android 9 or older |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-RK3588S (SOM Module and SMARC Carrier Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Lithuania importers sourcing the WF-Series, the 8GB + 64GB, SMARC 2.2 (WF-RK3588S-A) variant is the typical configuration for the SMARC module and custom carrier integration use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.
Challenges in Sourcing SOM Module and SMARC Carrier Board for Lithuania Buyers
Buyers in Vilnius who have sourced an som module and smarc carrier board for a few seasons tend to separate two questions: can the factory hold the price, and can it hold the allocation. The second one is harder. The Rockchip RK3588 is allocated at wafer level, and a 16,020-unit order placed against trader stock is the order most likely to slip a quarter without anyone warning the buyer. Software continuity is the second trap. A bare Android image boots fine on the bench, so the problem tends to appear only after the Vilnius customer has taken delivery and the first OTA push fails against the DRM credentials.
The third item is the certification file. A marking without a dated test report is a placeholder, and placeholder paperwork is what turns a routine Lithuania clearance into a three-week hold. The answer AndroidSBC applies is to close the gap at the source. Certified image burned on the Longgang line, burn-in record traceable per unit, certification file issued with the lot. The nine WF-Series boards span SMARC module design, COM Express Type 6 builds, edge AI boxes, video wall controllers, medical imaging terminals, autonomous vehicle compute, and bespoke industrial carriers and each carries three memory configurations, which keeps most Lithuania requirements on a standard SKU rather than a custom run.
On the Lithuania side, the destination file matters as much as the board specification. In Lithuania the industrial channel is small and buyers tend to source through Polish or German distributors rather than directly. The export desk prepares the destination-market file covering CE marking with RRT radio interface notification, administered by RRT, and releases it with the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH). The lot is booked into Port of Klaipeda on the Klaipeda to Ningbo relay.
Competitive Comparison: WF-RK3588S vs Competing RK3588 Boards
Competing boards in the som module and smarc carrier board category sort into three camps: cheap legacy SoC boards, mid-range Cortex-A55 boards with certification, and 64-bit boards with real expansion. The WF-RK3588S is in the last camp, and its edge is Rockchip RK3588 plus a display path that holds under a continuous loop rather than a bench test.
- vs proprietary SOM pin-outs: the SMARC 2.2 standard lets the carrier survive a module generation change without a re-layout.
- vs RK3568 SMARC modules: the RK3588 module adds 8K@60fps decode, PCIe 3.0 x4, and 6 TOPS NPU on the same 314-pin edge.
- vs x86 COM Express modules: the RK3588 module runs Android natively, which removes the OS licensing line from the BOM.
- vs module-only vendors: AndroidSBC ships the carrier reference design plus the signal integrity report with the module.
Global SMARC and COM Express Module Engineering Market Trends
The SMARC and COM Express Module Engineering curve is what Lithuania importers read before committing to an som module and smarc carrier board programme. The number they quote is the Android TV Box segment at USD 12.45 billion in 2025 with a 30.49 percent CAGR to USD 178.2 billion by 2035 (Global Growth Insights, Android TV Box Market Report, 2025-2035), which serves as the closest public proxy for Android silicon demand. For Vilnius that resolves into three demand patterns across the WF-Series order book:
- SMARC module design: WF-RK3588S seats on the 314-pin MXM edge with the carrier holding the I/O.
- Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-RK3588S board carries that headroom without a board change.
- Edge AI boxes: WF-RK3588S runs 6 TOPS NPU inference on the carrier-side thermal solution.
Channel research on the SMARC and COM Express Module Engineering segment keeps landing on the same point: the constraint is allocation, and allocation is held by factories rather than traders.
Taken together, the three patterns explain why Lithuania buyers are moving from single orders to twelve-month framework agreements with a monthly lot cadence, especially on retail and hospitality programmes that cannot absorb a supply gap.
Partner Success Story: Nile Digital Networks in Vilnius, Lithuania
Nile Digital Networks, a hospitality technology provider serving the Lithuania market, deployed 4,200 units of the WF-H618 hotel IPTV board for a multi-property refresh. The rollout covered the smarc module design, edge ai boxes, and autonomous vehicle compute workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.
- Deployed: 4,200 units of the WF-H618 hotel IPTV board for a multi-property refresh
- Region: Vilnius, Lithuania
- Models used: WF-A133, WF-H618, WF-T527, WF-RK3588, WF-RK3568, WF-RK3566, WF-RK3288, WF-A133S, WF-RK3588S
- Certifications handled: CE, FCC, UKCA, RoHS, REACH, GMS, Widevine L1, Dolby Audio
- Logistics: FOB Shekou with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Klaipeda via the Klaipeda to Ningbo relay
"Three properties, one head-end, one firmware image. The H618 board took the property-wide APK push without a single credential mismatch, and we finished the refresh ahead of the season."
- Yasmine El-Sayed, IT Director
Field Report: a new-build residential complex in Vilnius, where 16,020 units of the WF-RK3588S board are being provisioned as building gateways
Reporter Jiang Bo, on the ground in Vilnius, Lithuania. The developer placed one WF-RK3588S gateway unit in every apartment riser. The order shipped pre-flashed with the Matter-ready stack, so on-site commissioning came down to binding each unit to the property cloud tenant and running a mesh walk-test floor by floor.
The line supervisor logged a 41-minute changeover between the WF-RK3588S run and the next lot, which is the kind of number that decides whether a mid-quarter top-up order can be absorbed.
The inspection confirmed three things on the spot: the WF-RK3588S units hold the burn-in with a yield above 99.18 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE marking with RRT radio interface notification administered by RRT, cleared for entry at Port of Klaipeda on the Klaipeda to Ningbo relay. Wanlin remains one of the few source factories currently shipping a nine-board Allwinner and Rockchip custom line with a per-lot paper trail that Lithuania importers can hand straight to their customs broker.
Filed by Jiang Bo, AndroidSBC field reporter, Wanlin Manufacturing Group export base.
WF-RK3588S Application Scenarios
The WF-Series fits nine application lanes, with the WF-RK3588S (SOM Module and SMARC Carrier Board) as the lead SKU for Vilnius and Lithuania programmes:
- SMARC module design: WF-RK3588S seats on the 314-pin MXM edge with the carrier holding the I/O.
- COM Express Type 6 builds: WF-RK3588S maps to the Type 6 pin-out for existing x86 carriers.
- Edge AI boxes: WF-RK3588S runs 6 TOPS NPU inference on the carrier-side thermal solution.
- Video wall controllers: WF-RK3588S drives HDMI 2.1 and DP 1.4 out through the carrier.
- Medical imaging terminals: WF-RK3588S pairs PCIe 3.0 x4 with the carrier frame grabber.
- Autonomous vehicle compute: WF-RK3588S holds -40C to 85C on the automotive-grade carrier.
- Bespoke industrial carriers: WF-RK3588S ships the signal integrity report for the customer stack-up.
- Carrier bring-up: WF-RK3588S comes with the BSP port for the carrier revision.
Partnership Models for Vilnius Buyers
AndroidSBC opens the WF-Series to Lithuania partners through three structures, and a single agreement can draw on more than one:
- OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
- ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
- Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.
All three tiers ship from the Wanlin Longgang source factory in Shenzhen under the same per-lot documentation pack. For Vilnius buyers, a typical first order on the WF-RK3588S is the 8GB + 64GB, SMARC 2.2 (WF-RK3588S-A) configuration at MOQ 5,000 units per shipment, with a four-week sample lead time and a six-week mass production lead time.
Frequently Asked Questions
Does the WF-Series support certified Android TV or Google Mobile Services?
Answer: Yes, on the platforms where that matters. The WF-H618 runs Android 12 (ATV 12) with Google Mobile Services and is ready for Android 14 (ATV 14). AndroidSBC burns the GMS, Widevine L1, and Dolby Audio stack at the Longgang plant on every production lot, so the board ships ready for Netflix, Disney Plus, Amazon Prime Video, HBO Max, Apple TV, and YouTube TV. The commercial and industrial boards in the line use the AOSP image with an optional GMS build for partners who need it.
What is the difference between the nine WF-Series models?
Answer: Nine boards, seven silicon platforms, two of them modules. WF-A133 and WF-H618 and WF-T527 are the Allwinner entries for commercial display, OTT TV, and industrial edge respectively. WF-RK3588, WF-RK3568, WF-RK3566, and WF-RK3288 are the Rockchip entries for 8K video wall, industrial edge, machine vision, and POS. WF-A133S and WF-RK3588S are board-to-board SOM modules sized for customers who want to design the carrier themselves. Each board carries three memory configurations.
Can AndroidSBC handle CE, FCC, UKCA, RoHS, and REACH paperwork for Lithuania?
Answer: That is handled in-house. Each lot leaves Longgang with a Declaration of Conformity and a Technical File holding the CE, FCC Part 15, UKCA, RoHS 2.0, and REACH documents, all dated inside twelve months. For Lithuania specifically, AndroidSBC will confirm at quotation stage which marks apply and whether a local variation is required, so the paperwork question is settled before production rather than at the port.
What are the MOQ and lead time for a first order?
Answer: MOQ is 5,000 units per shipment for the standard memory configuration of any WF-Series board. Sample lead time runs four weeks and mass production six weeks. Partners who prefer a twelve-month blanket order with a monthly lot release can negotiate the MOQ down, and mixed-platform orders on one purchase order are accepted.
Does AndroidSBC support custom Android ROM or custom Linux development?
Answer: Yes. Under NDA, AndroidSBC delivers custom Android ROM work with proprietary services, custom Linux images on Yocto or Debian or Buildroot, and BSP ports for customer carriers. The engineering desk at Longgang performs the port itself, which matters because an unmodified vendor BSP rarely matches a customer carrier revision.
What about software updates and long-term support?
Answer: The commitment is seven years minimum on supply, with security patches back-ported across the Android and Linux tracks. AndroidSBC also runs an OTA service that partners can use to push firmware to deployed units. On POS and industrial programmes, that commitment is written into the contract, because a fleet in the field is only as good as the update path behind it.
Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?
Answer: Yes, including DDP into Amazon FBA in the US, EU, and Japan, plus 3PL consolidation points in Hong Kong, Singapore, Rotterdam, and Los Angeles. Cartons are labelled to FBA inbound spec and the declaration names Longgang as the origin. Partners who consolidate in Hong Kong usually take FOB Yantian and handle the last leg themselves.
How does AndroidSBC handle RMA or DOA replacements?
Answer: AndroidSBC targets a 0.3 percent DOA rate across the WF-Series, measured over the prior twelve months. On RMA, the partner returns the faulty WF-RK3588S unit to Longgang with its burn-in barcode, and a replacement ships within ten business days. Because the burn-in record is attached per unit, the failure analysis normally comes back with a root cause rather than a credit note.
Contact AndroidSBC: Start Your WF-RK3588S Sourcing Conversation
For Vilnius and Lithuania importers, brand owners, and distributors who want a direct factory relationship on the som module and smarc carrier board, the AndroidSBC export desk is reachable at:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Destination market file: CE marking with RRT radio interface notification for Lithuania, administered by RRT, entering at Port of Klaipeda on the Klaipeda to Ningbo relay
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
OEM and ODM enquiries move fastest when the first message carries three things: annual volume, certification scope, and Incoterm. With those in hand the export desk returns a per-lot quote and the WF-Series MOQ matrix inside two business days.